Part Number Hot Search : 
MK325 NSC5019D NSC5019D 74HC147 2805S FZ46ZL RS407L 370LR
Product Description
Full Text Search
 

To Download AZ2850 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 AZ2850
30 AMP MINIATURE POWER RELAY
FEATURES * * * * * * * 30 Amp switching capability DPST-NO and DPDT configuration Meets 8 mm creepage, 4 kV dielectric Class F construction PCB terminals Epoxy sealed versions available UL, CUR file E44211, VDE 40023442 GENERAL DATA
DPST-N.O. DPDT Resistive load: Max. switched power: 560 W or 8310 VA Max. switched current:30 A N.O., 3 A N.C. Max. switched voltage: 600 VAC or 30 VDC* UL, CUR N.O. 30 A at 277 VAC General Use, 100k cycles 1 Hp at 120 VAC, 100k cycles 2.5 Hp at 240 VAC, 100k cycles 110 LRA/25.3 FLA at 240 VAC (DC coils only), 30k cycles 3 A at 277 VAC General Use, 100k cycles N.O. 30A 250 VAC, N.C. 3A 250 VAC
*Note: If switching voltage is greater than 30VDC, special precautions must be taken. Please contact the factory.
CONTACTS
Arrangement Ratings
Life Expectancy Mechanical Electrical Operate Time Release Time
Minimum operations 5 x 107 1 x 105 at 30 A 120 VAC Res. N.O. 15 ms typical 25 ms maximum with bounce 10 ms typical 25 ms maximum with bounce (with no coil suppression)
Dielectric Strength 1500 Vrms contact to contact (at sea level for 1 min.) 4000 Vrms contact to coil 2000 Vrms between contact sets Insulation Resistance Dropout Ambient Temperature Operating Storage Vibration Shock 109 ohms minimum at 500 VDC DC: Greater than 10% of nominal coil voltage AC: Greater than 20% of nominal coil voltage At nominal coil voltage DC: -40C (-40F) to 95C (203F) AC: -40C (-40F) to 75C (167F) -40C (-40F) to 155C (311F) 0.062" DA at 10-55 Hz Operational, 10 g for 11 ms 1/2 sine pulse (no contact opening > 100usec) Non-destructive, 100 g for 11 ms 1/2 sine pulse P.B.T. polyester Tinned copper alloy, P.C. 270C (518F) 5 seconds 80C (176F) 30 seconds 86 grams
UL, CUR N.C. VDE
Material Resistance
Silver cadmium oxide, silver tin oxide <50 milliohms initially (6 V, 1 A voltage drop method)
COIL
Power At Pickup Voltage (typical) Max. Continuous Dissipation Temperature Rise Temperature DC: 0.925 W AC: 2.6 VA DC: 5.0 W at 20C (68F) AC: 7.0 VA at 20C (68F) DC: 48C (86F) at nominal coil voltage AC: 68 C (122F) at nominal coil voltage Max. 155C (311F) Enclosure Terminals Max. Solder Temp. Max. Solder Time Max. Solvent Temp. Max. Immersion Time Weight
NOTES
1. All values at 20C (68F). 2. Relay may pull in with less than "Must Operate" value. 3. Specifications subject to change without notice.
3/3/08W
AZ2850
RELAY ORDERING DATA
COIL SPECIFICATIONS - DC Coil
Nominal Coil VDC 6 12 24 48 110 Nominal Coil VAC 12 24 120 208 220 240 277 Must Operate VDC 4.5 9.0 18.0 36.0 82.5 Max. Continuous VDC 10.5 20.7 41.8 83.4 190.5 Coil Resistance 10% 22 86 350 1390 7255 Nominal Current mA 10% 325 154 33.5 19.3 18.1 17.3 14.5
ORDER NUMBER*
AZ2850-2C-6D AZ2850-2C-12D AZ2850-2C-24D AZ2850-2C-48D AZ2850-2C-110D
COIL SPECIFICATIONS - AC Coil
Must Operate VAC 9.6 19.2 96.0 166.4 176.0 192.0 221.6
60 Hz [1]
Max. Continuous VAC 15.6 31.2 156.0 270.4 286 312.0 360.1 Coil Resistance 10% 9.5 35.7 830 2600 2870 3800 4700
ORDER NUMBER*
AZ2850-2C-12A AZ2850-2C-24A AZ2850-2C-120A AZ2850-2C-208A AZ2850-2C-220A AZ2850-2C-240A AZ2850-2C-277A
*Add suffix "E" for epoxy sealed version. Substitute "2A" for "2C" to indicate DPST (N.O.) contacts. Add suffix "E" to "2A" or "2C" to indicate AgSNO2 contacts [1] For 50 Hz coil replace "A" with "A5" (example: "A2280-2C-24A5").
MECHANICAL DATA
WIRING DIAGRAM
2.07 MAX [52.6] 1.37 MAX [34.8]
0 2
6 1
1.21 MAX [30.7]
2 FORM C 0 2
0.16 [4.0]
0.25 [6.4]
0.04 [1.2]
6 1 2 FORM A
0.31 [7.9]
0.59 [14.9] 0.10 [4.7]
PCB LAYOUT
0.31 [7.9]
0.59 [14.9]
O0.08 [ O2.0]
16X-FORM C 12X-FORM A 0.08 [2.12]
0.63 [16.0]
1.00 [25.4]
0.27 [6.8]
0.43 [10.9]
1.00 [25.4]
1.37 [34.8]
0.20 [5.2]
0.16 [4.1]
1.52 [38.5] 2.07 [52.6]
0.20 [5.2]
0.16 [4.1]
1.61 [41.1]
Viewed toward terminals
Dimensions in inches with metric equivalents in parentheses. Tolerance: .010"
3/3/08W


▲Up To Search▲   

 
Price & Availability of AZ2850

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X